For iphone speaker

For iphone speaker 1. can charge , volume switch and data transfering function 2. 1 year warranty 3.CE&ROHS

For iphone speaker  

Introduction

 This product is designing for iPad,iPhone,iPod console charging, and could use as a charger speaker for other  kinds of audio equipment to play music.1.It is using the Ipad/Iphone original adapter for supporting power, could charge ipad,iphone console when power on. 

2.With audio input plug , support many external device like MP3, MP4. 3. With LCD data clock and alarm clock function.

4. With volume switch, user could adjust the volume by using its switch. 5. With data transfering function, could connect the console to PC by using this product for data transfering.

6.Accessories including in this product 

Item	specification
USB cable	big 4pin to small 5pin, length: 1000mm
audio cable	3.5mm
button battery	3V

User Manual

1.Plug the ipad,iphone or ipod console to charger,then connect original ipad/iphone AC to power,when it is connecting successfully,the charger could start charging the console.it will showing charging on console,whatever the speaker power swtich is on or off,it will not effect the charging situation at the same time.

2.Turn on the power switch on the charger speaker,then enter into the console to play music, speaker will open automaticly,then press the -/+ key button to adjust its sound,press the power switch on the speaker then the music will stop,press another time it will open again. 3.  Put the audio device (MP3,MP4 and so on) through audio cable to connect the audio plug on the charger, it will be use as a outer speaker. 4. User could setting the time on the data clock, alarm clock by the keys ‘CLOCK’,‘ALARM’,‘HOUR’and‘MIN’on speaker. 5. After the alarm clock time setting,user can set on or off the alarm sound through 'ALARM ON / OFF'.6. The data clock is using 3V button battery for supporting its power. User could replace the battery by openning the battery cover when the battery power is low. 7. Plug the USB cable to charger then connect the console to PC, it could be data transfering between console to PC. (Remark: If it is using for Ipad, only for data transfer used, could not charge ipad

Attention

1  Please put this charger speaker on a stable flat placement, far away from the water, wet,heavy sunshine,hight temperature place.  2  When you are using the Ipad,Iphone or Ipod console playing music or movie, then at the same time plug the other audio device through its input, the Ipad,Iphone or Ipod audio will close automaticly, the speaker will offer its output for the other audio device. 3  Do not set battery at the opposite site when replace button battery, or digital clock would not display normally.(PS: The "+" on the surface of the battery should be set upturn)

Maintenance

1 If you want to clean the speaker, pls use the soft cloth with a little soap water clean tightly, do not use the cloth with imprequnant(for axample the benzene, thinner and so on) to clean. Or it will damage this product. 

2 If long time no use, pls close its power, and keep in a dry , cool and air circulating place.

 Accessories photos:

Product PG-IP083 photos:

For iphone speaker